6-Pack Ovonic 80C 1S 300mAh HV 3.8V LiPo Battery with PH2.0 Connector for FPV Drones & Tiny Whoop - Perfect for Racing, Freestyle Flying, and Indoor Drone Practice

Special note: The Voltage on the battery label is 3.7V, but this is an HV 3.8V battery, just a label error.

Ovonic 80C 1S 300mAh HV 3.8V LiPo Battery with PH2.0 Plug for FPV Tiny Whoop.

Here you can find more , such as:

Spec of Ovonic 80C 1S 300mah battery:

• Chemistry:Li-Polymer(LiPo)
• Configuration:1S1P
• Voltage(V):3.8V(HV)
• Capacity(mAh):300mAh
• Discharge Rate: 80C
• Max Burst Discharge Rate: 160C
• Length(dev.5mm) : 63mm
• Width(dev.2mm) : 11mm
• Height(dev.2mm) : 7mm
• Net Weight(dev.5g):8g /pack
• Connector Type: PH2.0 Plug

Package Content

- 6×Ovonic 80C 3.8V 1s 300mah lipo battery with PH2.0 Plug
- 1×User Manual

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.35V (Normal cell voltage is between 3.8V~4.35V).
3. To double make sure of safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.