4 Pack Ovonic Hard Case LiPo 2S 5200mAh 50C 7.4V Battery with Deans Connector for 1/10 & 1/8 Scale RC Cars - Perfect for RC Racing, Bashing and Off-Road Adventures

Ovonic 50c 2S 7.4v 5200mah lipo battery Hardcase offers you very high power and very long run time for your RC cars. They widely fit the 1/8 and 1/10 RC car Models etc. The Hardcase of this 7.4v 5200mah lipo battery provides your car solid protection. With high performance, more reliable quality, High power, and High Discharge rate(C rating), they are your ideal choice for the RC car hobby.

Specification:

• Brand: Ovonic
• Chemistry: Li-Polymer (LiPo)
• Configuration: 2S
• Voltage(V): 7.4V
• Capacity (mAh): 5200mAh
• Discharge Rate: 50C
• Max Burst Discharge Rate: 100C
• Charge Plug: JST-XH
• Discharge Plug: Deans Plug
• Net Weight (dev.20g): 512g (259g for one pack)
• Length (dev.5mm): 139mm
• Width (dev.2mm): 46mm
• Height (dev.2mm): 24mm

If you don’t want to replace the plug by yourself, we also provide . And if you only want one pack, you can get it by clicking .

lipo batteries provide more punch and longer run time.

Compatible with:

Ovonic 50C 2S 7.4 v 5200mah lipo battery HardCase is the reliable power for 1/8 and 1/10 RC car hobby such as Losi, TRA Slash, HPI Strada XB 1/10 RTR Electric Buggy,1/10 Short Course, Team Associated, Axial, Tamiya, Duratrax, Jammin', Redcat Racing, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version, Kyosho GP 4WD Racing Truck, etc.

Package Content:

-4 x Ovonic 50C 2S 7.4 v 5200mah lipo battery with Deans Plug LiPo Battery Pack
-1 x User Manual

A quick look at 2s 5200mah :

Kindly Note:

- All batteries are available Ready-to-Run, Please select the right connector according to - your original battery.
- At the same time, please kindly compare the dimension with your original battery.
- If you have any other special demands or problems, please feel free to contact us.

Please Notice:

* For the RC battery, only if the voltage and the plug match, then it will fit.
* Please stop charging immediately when the cell voltage has been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
* To double make sure of safety, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
* If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.