Ovonic Rebel 80C 6500mAh 11.1V 3S LiPo Battery with XT90 Connector - High Performance RC Battery for ARRMA 3S & 6S Vehicles - Perfect for RC Cars, Trucks, and Off-Road Bashing

3s& 4s lipo widely used in 1/5 to 1/10 Scale RC cars. Special for Arrma Truck, Buggy, With advanced lithium raw materials, high magnification, give you more punch.

Ovonic Rebel 80C 3S 6500mAh LiPo Battery 11.1V Softcase with XT90 Plug is suitable for 1/10 RC car, two for 1/8, 1/7 truck, like TALION 6S BLX.

Pls, note that this is a soft case battery. For some RC cars, Hardcase is recommended to protect the battery better.

More Choice for You(Pls check the Size and Plug before adding to cart):

Hardcase 3s:

,

Softcase 3s:

• (Higher C-rate)
• (Only different in plug)
• , ,

Softcase 6s:

• ,
• 100C 6500mAh 6S EC5, 50C 5000mAh 6S EC5

Spec of 80C 3s 6500mah XT90 lipo battery:

• Brand: Ovonic
• Chemistry: Li-Polymer(LiPo)
• Configuration: 3S1P
• Voltage(V): 11.1V
• Capacity(mAh): 6500mAh
• Discharge Rate: 80C
• Max Burst Discharge Rate: 160C
• Length(dev.5mm): 135mm
• Width(dev.2mm): 42mm
• Height(dev.2mm): 33.3mm
• Net Weight(dev.20g): 414g
• Connector Type: XT90 Plug
• -Balance Connector Type: JST-XH

Compatible with:

Ovonic Rebel 80C 11.1v 3s 6500mah lipo battery XT90 pack for most of 1/10 scale RC car, two for 1/8, 1/7 Truck, buggy. Only if the Size, Plug, and voltage match, you can power your car directly.

One pack fits Arrma:

• Granite 4x4 3s, Senton 4x4 mega, TYPHON 4x4 3S
• BIGROCK 4x4 3S BLX, OUTCAST 4x4, Kraton 4x4

As the ARRMA recommends the hard case lipo for these 4x4 cars, you can choose 3s Hardcase lipo batteries, too.

Two for Arrma:

• FELONY 6S BLX, LIMITLESS, INFRACTION 6S BLX
• MOJAVE ROLLER, MOJAVE 6S, KRATON 6S BLX
• TALION 6S BLX, OUTCAST 6S BLX, Kraton Roller, NOTORIOUS 6S

Package Content:

• 2×Ovonic 80C 11.1v 6500mah 3s lipo battery with XT90 Plug
• 1×User Manual

A test video from Overkill RC:

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3. To double make sure safe, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use Balance Charger to charge and recycle several times first.