Ovonic 2200mAh 2S LiPo Battery with XT60 & Trx Plug is specially designed for 1/16 and 1/18 scale TRA RC cars. With a 2S (7.4V) configuration, this battery offers a solid balance of power and endurance, making it ideal for smaller RC vehicles. The inclusion of both XT60 and Trx plugs provides flexibility, allowing it to be compatible with a variety of connectors used in TRA cars. Its 2200mAh capacity ensures extended run times.
More Choice for You:
If you need a lipo battery with other voltage and capacity for 1/16 TRA Cars, is available, and more is on stock for you to pick from. Recommended Products:
Note: If the plugin your car is a TRA ID connector, this adapter may not fit the Ovonic lipo battery.
Spec of Ovonic 2S 2200mAh:
- Brand: Ovonic
- Chemistry : Li-polymer
- Length (dev.5mm) : 87mm
- Width (dev.2mm) : 33mm
- Height (dev.2mm) : 18mm
- Capacity : 2200mAh
- Voltage: 7.4V
- Cell Number: 2S
- Discharge Rate: 50C
- Max Burst Discharge Rate: 100C
- Net Weight(dev.20g) : 236g (118g for one pack)
- Connector Type: XT60 & Trx Plug
- Balance Connector Type : JST-XH
Compatible with:
Ovonic 2200mAh 7.4V 50C 2S1P Lipo Battery Pack with XT60& Trx plug special designed for professionals is compatible with RC TRA 1/16 E-Revo & VXL, 1/16 Summit, 1/16 Slash, Losi 1/14 mini 8ight.
It also could be used for RC airplanes, RC helicopters, RC boats, drones, and FPVs, only if the voltage, weight, dimension, and plug match. and RC Helicopters.
Package Content
-2 x OVONIC 7.4V 2200mAh 2S1P 50C Lipo Battery with XT60 & Trx Plug
-1x User Manual
Kindly Note:
- All batteries are available Ready-to-Run, Please select the right connector according to - your original battery.
- At the same time, please kindly compare the dimension with your original battery.
- If you have any other special demands or problems, please feel free to contact us.
Please Notice:
- For the RC battery, only if the voltage and the plug match, then it will fit.
- Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
- To double make sure of safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
- If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.
