Ovonic Rebel 2.0 120C 6S 1300mAh Lipo Battery LiHV 22.8V Pack with XT60 Plug
OVONIC 1300mAh 6S 120C LiPo battery is designed for high-performance FPV applications, offering a 120C discharge rate and 1300Mah, Its lightweight and compact design (weighing only 200g) makes it well-suited for 5 to 6 inch FPV drones, 180-330mm brushless FPV drones, and various aerial models. It has strong compatibility, including GEPRC MARK5, DJI FPV, Nazgul5, TITAN XL5, Chimera5, and many more. Which it an ideal for FPV racing, aggressive freestyle maneuvers, and long-range flights.
Key Features:
High Discharge Rate for Performance: With 120C discharge rate means the battery can provide up to 156A of continuous current. Which is perfect for high-performance applications, such as FPV racing, aggressive freestyle maneuvers, and long-range FPV flights that demand rapid power delivery and quick throttle response.
Lightweight and Compact: With 1300mAh capacity and only 200g, making it a good fit for 5 to 6 inch FPV Drones, 180-330mm Brushless FPV etc. Its relatively lightweight construction allows for optimal performance without significantly increasing the weight of the aircraft or drones, which is particularly crucial in flying FPV freestyle drones or airplanes.
Faster Response Speed: High voltage For applications that require high power output (such as fast-accelerating FPV racing), high-voltage batteries can quickly provide sufficient current to ensure efficient operation of the equipment. It can reduce the current consumption of each flight and extend the flight time. High voltage means that the aircraft can obtain sufficient energy at a lower current, reduce internal resistance loss, and improve endurance. Reduce battery heating problems and extend battery life.
Strong Compatibility: Compatible with 180-330mm Brushless FPV, 5 to 6 inch Drone, GEPRC MARK5, MARK4, Crocodile5 Baby, DJI FPV, Nazgul5, TITAN XL5, Chimera5, Evoque F5D/F5X, Nazgul Evoque F6X/F6D, Racing Pilot FPV, Airplane, Quads, QuadCopter, HeliCopter, MultiCopter Freestyle Drone, UAV, Aerial Model, DIY FPV, etc.
Two-Pack Batteries & Cost-Effective: OVONIC 1300mAh 6S 120C LiPo battery is a more budget-friendly option for intermediate hobbyists. A two-pack of batteries is more affordable, and when one battery runs low, you can quickly swap out the batteries, extending your flight time. It provides solid performance without breaking the bank.
Spec of Ovonic 6s 1300mah 120C LIHV lipo:
| Brand | Ovonic |
| Chemistry | Li-polymer |
| Configuration | 6S1P |
| Voltage(V) | 22.8V |
| Capacity(mAh) | 1300mAh |
| Discharge Rate | 120C |
| Max Burst discharge Rate | 240C |
| Charge Plug | JST-XHR-7P |
| Discharge Plug | XT60 Plug |
| Net Weight(dev.20g) | 200g/0.44lb for one pack |
| Length(dev.5mm) | 82mm/3.22inch |
| Width(dev.2mm) | 29.5mm/1.16inch |
| Height(dev.2mm) | 47mm/1.85inch |
Compatible with:
Ovonic Rebel 2.0 120C 6S 1300mAh Lipo Battery LiHV 22.8V Pack is compatible with XT60 Plug with 180-330mm Brushless FPV, 5 to 6 inch Drone, GEPRC MARK5, MARK4, Crocodile5 Baby, DJI FPV, Nazgul5, TITAN XL5, Chimera5, Evoque F5D/F5X, Nazgul Evoque F6X/F6D, Racing Pilot FPV, Airplane, Quads, QuadCopter, HeliCopter, MultiCopter Freestyle Drone, UAV, Aerial Model, DIY FPV etc.
Package Content
- 2×Ovonic Rebel 2.0 120C 6S 1300mAh Lipo Battery LiHV 22.8V with XT60 Plug
- 2 x Brand Stickers
- 1 x User Manual
Please Notice:
- Use for optimal charging performance.
- Ensure compatibility with both voltage and plug specifications for proper fit.
- Cease charging immediately upon reaching 4.2V per cell (normal voltage range: 3.7V~4.2V).
- Prioritize safety by inspecting battery condition before each use.
- If a new battery doesn't hold a full charge or loses charge rapidly, use a Balance Charger and cycle it several times.
- For more safety guidelines, please refer to our .
